ZyXEL Access Point G1000 v2 91-005-124001B Manual Do Utilizador

ZyXEL G-1000 v2 User’s Guide

Chapter 6 Remote Management Configuration

71

Figure 27   Remote Management: FTP

The following table describes the labels in this screen.

Simple Network Management Protocol (SNMP) is a protocol used for exchanging 
management information between network devices. SNMP is a member of the TCP/IP 
protocol suite. Your G-1000 v2 supports SNMP agent functionality, which allows a manager 
station to manage and monitor the G-1000 v2 through the network. The G-1000 v2 supports 
SNMP version one (SNMPv1) and version two (SNMPv2). The next figure illustrates an 
SNMP management operation.

Note: SNMP is only available if TCP/IP is configured.

Table 27   Remote Management: FTP

Port

You may change the server port number for a service if needed, however you must 

use the same port number in order to use that service for remote management.

Server Access

Select the interface(s) through which a computer may access the G-1000 v2 using 

this service.

Secured Client IP 

Address

A secured client is a “trusted” computer that is allowed to communicate with the G-

1000 v2 using this service. 
Select All to allow any computer to access the G-1000 v2 using this service.
Choose Selected to just allow the computer with the IP address that you specify to 

access the G-1000 v2 using this service.

Apply

Click Apply to save your customized settings and exit this screen. 

Cancel

Click Cancel to begin configuring this screen afresh.