ZyXEL Access Point G1000 v2 91-005-124001B Manual Do Utilizador

ZyXEL G-1000 v2 User’s Guide

Chapter 9 Tools

87

This chapter describes how to upload new firmware, manage configuration and restart your G-
1000 v2. 

Find firmware at www.zyxel.com in a file that (usually) uses the system model name with 
a.bin extension, for example, "G-1000 v2.bin". The upload process uses HTTP (Hypertext 
Transfer Protocol) and may take up to two minutes. After a successful upload, the system will 
reboot. 

Only use firmware for your device’s specific model. Refer to the label on the bottom of your 
device.

Click Maintenance > Tools to open the Firmware screen. Follow the instructions in this 
screen to upload firmware to your G-1000 v2. 

Figure 34   Firmware Upgrade

The following table describes the labels in this screen. 

Note: Do NOT turn off the G-1000 v2 while firmware upload is in progress!

Table 35   Firmware Upgrade

File Path 

Type in the location of the file you want to upload in this field or click Browse ... to 

find it.

Browse... 

Click Browse... to find the .bin file you want to upload. Remember that you must 

decompress compressed (.zip) files before you can upload them. 

Upload 

Click Upload to begin the upload process. This process may take up to two 

minutes.