ZyXEL Access Point G1000 v2 91-005-124001B Manual Do Utilizador
Códigos do produto
91-005-124001B
ZyXEL G-1000 v2 User’s Guide
90
Chapter 9 Tools
After you see a “Restore Configuration successful” screen, you must then wait one minute
before logging into the G-1000 v2 again.
before logging into the G-1000 v2 again.
Figure 39 Configuration Restore Successful
The G-1000 v2 automatically restarts in this time causing a temporary network disconnect. In
some operating systems, you may see the following icon on your desktop.
some operating systems, you may see the following icon on your desktop.
Figure 40 Temporarily Disconnected
If you uploaded the default configuration file you may need to change the IP address of your
computer to be in the same subnet as that of the default G-1000 v2 IP address (192.168.1.2).
See the appendix for details on how to set up your computer’s IP address.
computer to be in the same subnet as that of the default G-1000 v2 IP address (192.168.1.2).
See the appendix for details on how to set up your computer’s IP address.
If the upload was not successful, the following screen will appear. Click Return to go back to
the Configuration screen.
the Configuration screen.
Figure 41 Configuration Restore Error
9.2.3 Back to Factory Defaults
Pressing the Reset button in this section clears all user-entered configuration information and
returns the G-1000 v2 to its factory defaults.
returns the G-1000 v2 to its factory defaults.