Sanyo CVW-EXA224 Manual Do Utilizador
22
Please make sure to check and clean the drain trap at
least once a month. Remove any material that has
gathered in the drain trap and dispose of it. Clean the
drain trap and put it back in its original position.
least once a month. Remove any material that has
gathered in the drain trap and dispose of it. Clean the
drain trap and put it back in its original position.
6.3 Honeycomb Assemblies (at least every 3 months)
Because Honeycomb Assemblies may deform under pressure, DO NOT use vacuum cleaners
to clean them.
to clean them.
a. When merchandise is in place under the Honeycomb Assembles, first cover the
merchandise with a cloth or other material to keep dust from falling.
b. Remove Honeycomb Assemblies by pulling down on the wire clips attached to the
assemblies.
c. Rinse Honeycombs in running water in order to flush out dust, etc. Dust is best
removed by spraying/flushing from the cleaner side
toward the dirtier side.
toward the dirtier side.
d. After thoroughly shaking and drying rinsed
Honeycomb Assemblies, replace them in their
original positions in the SANYO Cases.
original positions in the SANYO Cases.