Campbell Hausfeld AT122601 Manual Do Utilizador

(like a wooden pallet) a dry mat, or dry
carpet.

GeneRal SaFeTy
• . Read .all .manuals .included .

with .this .product .carefully . .
Be .thoroughly .familiar .
with .the .controls .and .the .
proper .use .of .the .equipment . .Follow .
all .instructions .

• . Only .persons .well .acquainted .with .

these .rules .of .safe .operation .should .
be .allowed .to .use .the .unit .

Do not

misuse

this product. Excessive exposure to
vibration, work in awkward positions,
and repetitive work motions can cause
injury to hands and arms. Stop using
any tool if discomfort, numbness,
tingling or pain occur, and consult a
physician.

1 . . Read .this .instruction .manual .before .

connecting .this .device .to .the .
compressor .

2 . . Safety .glasses .or .face .shield, .gloves .

and .a .NIOSH .approved .respirator .
must .be .worn .during .operation . .
Always .work .in .a .well .ventilated .
area .

3 . . During .operation, .do .not .expose .the .

hands .or .skin .directly .in .the .line .of .
the .blast .nozzle .

4 . . After .installation, .inspect .to .make .

sure .all .components .seal .properly .

5 . . Keep .children .away .at .all .times . .All .

visitors .must .be .kept .a .safe .distance .
and .wear .safety .glasses, .gloves .and .a .
respirator .

6 . . Do .not .exceed .the .maximum .

operating .pressure .of .the .
sandblasting .equipment .(125 .psi) .

MANUAL

Disconnect the sandblaster from the air
supply before changing accessories or
attempting to install, service, relocate
or perform any maintenance.

7 . . Check .hoses .and .air .lines .for .weak .

or .worn .condition .before .each .use . .
Make .sure .all .connections .are .secure .
before .use .

Do not

point

the sandblast gun at anyone or objects
other than the intended work object.

8 . . Do .not .depress .the .trigger .when .

connecting .the .air .supply .hose .

Do not

work

around oily rags or flammable liquids.
Sand striking metal can cause a spark
and create a fire or explosion.

Do not

spray

acids or caustics.

assembly

MoDel aT122601
1 . . Attach .material .hose .to .the .pick-up .

tube . .Place .pick-up .tube .in .bag .of .
medium . .(See .FIgure .4) .

2 . . Attach .the .air .compressor .hose .

to .the .air .inlet .(1/4 .inch .NPT(F)) .
at .the .bottom .of .the .gun .handle . .
An .optional .quick .coupler .and .

Operating .Instructions

www.chpower.com

General Safety Information

(Continued)

connector .can .be .used .to .attach .the .
hose .to .the .gun .

MoDel aT125102
1 . . Attach .the .material .hose .to .the .hose .

connector . .Attach .the .opposite .end .
of .the .material .hose .to .the .gun .(See .
Figure .5) . .Never .use .hose .clamps .to .
secure .the .hose .

noTe: .Do .not .cover .the .hole .in .the .
hose .connector .for .dry .blasting . . .For .
spraying .liquids, .slip .the .material .hose .
fully .on .to .the .hose .connector .covering .
the .hole .
2 . . Attach .the .air .compressor .hose .

to .the .air .inlet .(1/4 .inch .NPT(F)) .
at .the .bottom .of .the .gun .handle . .
An .optional .quick .coupler .and .
connector .can .be .used .to .attach .the .
hose .to .the .gun .

MoDel aT121002
1 . . Attach .the .hose .connector .to .the .

hopper .using .the .supplied .conduit .
nut .

2 . . Attach .the .material .hose .to .the .hose .

connector . .Attach .the .opposite .end .
of .the .material .hose .to .the .gun .(See .

Figure 1

Figure 2

Figure 3

Figure 5 - Model aT125102

Figure 4 - Model aT122601

Attach .air .

hose

Material .

hose

Do .not .cover .outer .

tube .with .hose .for .dry .

blasting

Pick-up .tube