Delta 36-5000 Manual Do Utilizador

9

•  The machine is heavy, two people are required to 

unpack and lift.

•  Use a safety strap to avoid tip over when lifting 

machine.

•  Prior to tool assembly and use, read this manual 

thoroughly to familiarize yourself with proper 

assembly, maintenance and safety procedures. 

Check shipping carton and machine for damage 

before unpacking. Carefully remove components in 

top foam layer. Remove the top layer of foam then 

remove all components in the bottom layer of foam. 

Lay out all parts on a piece of cardboard or other 

clean, flat surface. Two or more people are needed to 

lift the saw out of the carton. Always check for and 

remove protective shipping materials around motors 

and moving parts. Do not discard shipping carton and 

packing materials until you have carefully inspected the 

contents, assembled the machine and are satisfied that 

it operates correctly. 
Compare package contents to Component Parts List 

and Hardware Package List prior to assembly to make 

sure all items are present. Carefully inspect parts to 

make sure no damage occurred during shipping. If 

any parts are missing, damaged or preassembled, do 

not assemble. Instead, call DELTA

®

 Customer Care at 

1-800-223-7278 for assistance. 
After assembly remove any protective materials and 

coatings from all of the parts and the table saw. The 

protective coatings can be removed by spraying 

WD-40

®

 on them and wiping them off with a soft cloth. 

This may need to be redone several times before all of 

the protective coatings are removed completely. 
After cleaning, apply a good quality paste wax to any 

unpainted cast iron surfaces. Make sure to buff out the 

wax before assembly. 

1.  Table Saw with attached 

Carbide Blade, and Closed-

End Wrench (1)

2.  Extension Wing
3.  Switch Box (attached to 

saw) (1) 

4.  Tubular Stand (2)
5.  Support Panels (4)
6.  Fixed Wheels (2)
7.  Adjustable Feet (2)
8.  Pivoting Pedal and Caster 

(not shown) (attached to 

saw) (1) 

9.  Handwheel Handles (2) 

(attached to saw)

10.  Lock Knobs (2)
11.  Miter Gauge (1)
12.  Rip Fence Handle (1)
13.  Extension Wing (2) with 

36-5000 and 5100 

(1) with 36-5052 and 

36-5152 

14.  Rip Fence (1)
15.  Throat Plate (1)
16.  Blade Guard and  

Anti-Kickback Pawls

17.  Blade (1)
18.  Push Stick (1)

19.  Rear Rail
20.  Fence Guide
21.  Front Fence Rail

22.  Wood Table Extension
23.  Legs