Graco Inc. 310893 Manual Do Utilizador
Cleanup
310892F
23
Cleanup
If you suspect spray tip or hose is clogged or that pres-
sure has not been fully relieved after following the steps
above, VERY SLOWLY loosen tip guard retaining nut or
hose end coupling to relieve pressure gradually, then
loosen completely. Clear hose or tip obstruction.
sure has not been fully relieved after following the steps
above, VERY SLOWLY loosen tip guard retaining nut or
hose end coupling to relieve pressure gradually, then
loosen completely. Clear hose or tip obstruction.
Pressure Relief Procedure
1.
Lock gun trigger safety.
Set pump switch OFF.
Turn engine OFF.
Set pump switch OFF.
Turn engine OFF.
2.
Unlock gun trigger safety.
Turn pressure to lowest set-
ting. Trigger gun into pail to
relieve pressure.
Turn pressure to lowest set-
ting. Trigger gun into pail to
relieve pressure.
3.
Lock gun trigger safety.
Turn prime valve down.
Turn prime valve down.
4.
Remove guard
and SwitchTip.
and SwitchTip.
ti5822a
/&&
ti5827b
OFF
/&&
/.
ti10116a
PAINT
ti5828a
ti10117a
ti5829a
ti10116a
ti5830a