Graco Inc. 309295 Manual Do Utilizador

. 2. shows a typical electrostatic air-assisted spray 

system. It is not an actual system design. For assistance 
in designing a system to suit your particular needs, con-
tact your Graco distributor.

Mount warning signs in the spray area where they can 
easily be seen and read by all operators. An English 
Warning Sign is provided with the gun. 

Electrically interlock the gun air supply with the ventila-
tors to prevent gun operation without ventilating fans 
operating. Check and follow all National, State, and 
Local codes regarding air exhaust velocity require-
ments. 

NOTE: High velocity air exhaust will decrease the oper-
ating efficiency of the electrostatic system. Air exhaust 
velocity of 100 ft/min (31 linear meters/minute) should 
be sufficient.

Installing and servicing this equipment 
requires access to parts which may cause 
electric shock or other serious injury if work 
is not performed properly.

• Do not install or service this equipment 

unless you are trained and qualified. 

• Be sure your installation complies with 

National, State and Local codes for the 
installation of electrical apparatus in a 
Class I, Div. I, Group D or a Group II,
Category 2G Hazardous Location. 

• Comply with all applicable local, state, 

and national fire, electrical, and other 
safety regulations.

Provide fresh air ventilation to avoid the 
buildup of flammable or toxic vapors when 
spraying, flushing, or cleaning the gun. Do 
not operate the gun unless ventilation fans 
are operating.