Ariens 921025 Manual Do Utilizador

GB - 11

See Figure 4 on page 10 for all Controls and 
Features locations.

When Attachment Clutch and then Traction 
Drive Clutch are engaged, the Attachment 
Clutch will remain engaged (lever down) if 
released. To stop attachment, release 
Traction Drive Clutch and both clutches will 
disengage.

Squeeze the Traction 
Drive Clutch Lever 
against the Handlebar 
(1) to engage wheel 
drive for propelling unit. 

Release lever (2) to 
stop movement.

NOTE: Traction drive clutch should be 
engaged before the attachment clutch when 
brushing.

Squeeze Attachment 
Clutch Lever against 
Handlebar (1) to 
engage brush. 
Release both clutch 
levers (2) to disengage 
power and apply brake 
to brush.

IMPORTANT: If the belt squeals when the 
attachment clutch lever is engaged, the 
attachment drive may be frozen. Immediately 
release the attachment clutch lever and move 
the unit into a heated area to thaw.

IMPORTANT: If belt squeals when brush runs 
freely, see Attachment Clutch/Brake 
Adjustment on page 24.

1. Choke Closed position: chokes off air to 

engine for easier start.

2. Choke Open position: allows for normal 

operation.

Gradually open choke after engine starts.

1. Set the engine shut off switch to the On 

position to start and operate the engine. 

2. Set the engine shut off switch to the Off 

position to shut off a running engine. 

The Throttle controls the 
engine speed. To 
increase or decrease the 
engine speed, adjust to:

1. Fast (normal or warm 
starts)
2. Part-Throttle 
3. Slow (cold weather 
starts)

WARNING: AVOID INJURY. Read 
and understand the entire Safety 
section before proceeding.

WARNING: To avoid injury to 
hands and feet, always disengage 
clutches, shut off engine, and wait 
for all movement to stop before 
unclogging or working on snow 
brush.
Keep hands and feet away from 
brush.

2

1

OL2701

2

1

OL2691

1

2

3

2

1