Ariens 921025 Manual Do Utilizador
GB - 8
Tools Required:
•
Tire Gauge
•
Pliers
•
1/2-In. 3/8-In, 7/16-In, and 9/16-In
Wrench or Adjustable Wrench
Wrench or Adjustable Wrench
Unpacking Unit
Unfold Handlebar
1. Remove the lower and loosen the upper
hardware on the handlebar assembly.
2. Loosen the hardware on the shift rod.
3. Put the speed selector lever in the sixth
3. Put the speed selector lever in the sixth
forward position.
4. Rotate the handlebars into operating
position.
NOTE: Be careful not to damage cable spring
hooks when rotating handlebars upward.
hooks when rotating handlebars upward.
5. Install and tighten the hardware on the
handlebar assembly and shift rod.
.
Check Function of Dual Handle
Interlock
Interlock
Without the engine running, press down
(engage) both clutch levers. Release
attachment clutch lever. Attachment clutch
should remain engaged until traction clutch
lever is released, then both clutches must
disengage. If they do not, contact your Dealer
for repairs.
(engage) both clutch levers. Release
attachment clutch lever. Attachment clutch
should remain engaged until traction clutch
lever is released, then both clutches must
disengage. If they do not, contact your Dealer
for repairs.
ASSEMBLY
WARNING: AVOID INJURY. Read
and understand the entire Safety
section before proceeding.
and understand the entire Safety
section before proceeding.
WARNING: Dropping or tipping
over boxed unit could result in
personal injury or damage to unit.
over boxed unit could result in
personal injury or damage to unit.
Figure 3
OS6026
1. Shift Rod
2. Upper and Lower Handlebar
2. Upper and Lower Handlebar
Hardware
3. Shift Rod Hardware
4. Handlebar
4. Handlebar