Ryobi Outdoor RY52002 Manual Do Utilizador

8

9

This product requires assembly.
n

  Carefully remove the tool and any accessories from the 

box. Make sure that all items listed in the packing list are 
included.

n

  Inspect the tool carefully to make sure no breakage or 

damage occurred during shipping.

n

  Do not discard the packing material until you have care-

fully inspected and satisfactorily operated the tool.

n

  If  any  parts  are  damaged  or  missing,  please  call

1-800-860-4050 for assistance.

See Figure 1.
Before attempting to use this product, familiarize yourself 
with all operating features and safety rules.

The engine switch controls the ignition system. The switch 
must be in the ON (

I) position for the engine to start and 

run.

Using the J” Barrier handle allows better control of the pruner 
to maximize operator safety.

The priming bulb pumps fuel from the fuel tank to the car-
buretor. This is necessary only when starting a cold engine 
or after refueling an engine that has run out of fuel. 

The shoulder strap helps support the weight of the pruner 
during use.

The  start  lever  opens  and  closes  the  choke  valve  in  the 
carburetor. 

The starter grip is used for starting the engine.

The throttle trigger is used for starting the pruner, and also 
for controlling blade rotation.

Power Head Assembly
Pruner Attachment
Trimmer Attachment
    Hex Screw
    Flat Washer
    Wing Nut
    Lock Washer
Curved Shaft Grass Deflector
Scabbard 
Scrench (5/8 in. x 3/4 in.)
8 oz. Bar and Chain Oil
Bottle of 2-cycle oil
Shoulder Strap Bracket
    Bolt
    Nut
Shoulder Strap
“J” Barrier Handle Assembly:
    “J” Barrier Handle
    Top and Bottom Clamp
    Short Bolt
    Long Bolt
    Flat Washers (2)
    Lock Washers (2)
    Nuts (2)
Operator’s Manual
Warranty Registration Card

If any parts are missing do not operate this tool until the 
missing parts are replaced. Failure to heed this warning 
could result in possible serious personal injury.

Do not attempt to modify this tool or create accesso-
ries not recommended for use with this tool. Any such 
alteration or modification is misuse and could result in a 
hazardous condition leading to possible serious personal 
injury.