Remington Power Tools BS1812A Manual Do Utilizador

12

Trimmer/Edger does not start wen you 
squeeze the trigger.

1.  Battery not installed properly.

2.  Battery not charged.

3. Trigger lockout button not

    depressed prior to squeezing trigger.

1.  Verify proper installation of bat-

tery.

2.  Insure battery is charged per re-

quirements.

3.  Follow directions outlined in basic 

trimmer operation.

Trimmer/Edger runs slowly or stalls 
easily.

1.  Battery is nearly depleted.

1.  Recharge battery completely.

Line does not feed when you tap the 
line advance button.

1.  All the line has been used on spool.

2.  Line has retracted into spool.

3.  Line is caught or tangled on spool and 

will not feed.

1.  Install new line on spool.

2.  Remove spool and pull line out, 

then replace spool.

3.  Remove spool, loosen and un-

tangle line, then replace spool.

Battery discharges quickly.

1.  Battery not fully charged.

2. Battery worn and will not hold 

charge.

1.  Recharge battery completely.

2.  Replace battery.

Battery not charging.

1.  Charger not plugged in.

2.   Battery not fully inserted into charger 

base.

3.   Charger cord not properly connected 

to charger base.

4.  Charger damaged.  

1.  Plug charger into 120V 60Hz AC 

source.

2.  Insure battery is inserted correctly 

in charger base.

3.  Insure charger cord is fully inserted 

into charger base.

4.  Replace charger.

Note: For additional help, visit our technical service web site at www.remingtonpowertools.com.