Pelco RK5000PS-5U Manual Do Utilizador
C1615M-A (9/05)
11
Service
REPLACING AN INTERNAL POWER SUPPLY
You can easily replace the internal power supply in the RK5000PS-5U with a replacement (RK5PWR-300). You will know if there is a problem
with the power supply because the blue Pelco badge on the front panel will turn off. Before replacing the power supply, check the fuse. It can be
replaced easily with the supplied spare. If the fuse is not the problem, then follow these steps and refer to Figure 8 to replace the power supply.
with the power supply because the blue Pelco badge on the front panel will turn off. Before replacing the power supply, check the fuse. It can be
replaced easily with the supplied spare. If the fuse is not the problem, then follow these steps and refer to Figure 8 to replace the power supply.
1. Unplug the AC power cord.
2. Unscrew the two thumbscrews on the front of the chassis that hold the power supply.
3. Pull the power supply out of the chassis using the handle.
4. Insert the new power supply.
5. Secure the power supply by tightening the two thumbscrews on the front of the chassis.
6. Plug in the AC power cord.
7. Turn on the power switch.