Yamaha Recording Equipment Manual Do Utilizador

Information Displays

The convenient Information displays let you see at-a-glance some of the more important settings relevant to each mode. Select 
the desired mode, then press the [INFORMATION] button to call up the Information display for that mode. To exit from the 
display, press the button again (or any other panel button).

Indicates the Bank/Number (page 60) of the currently 
selected Voice.

Indicates the currently selected Voice, on/off status of the four 
Elements and mono/poly (page 79) status.

Indicates the Portamento switch on/off status of the currently 
selected Voice.

Indicates the Upper/Lower setting of the Pitch Bend range.

Indicates the currently selected effect type for each effect 
block (page 179).

Indicates the Bank/Number (page 67) of the currently 
selected Performance.

Indicates the installation status of the respective Plug-in board. 
The Plug-in board name is displayed at the right of the 
corresponding slot number. When PolyExpand (page 265) is set to 
on in the Utility mode, “P” is indicated at the left of the slot number.

Indicates the Part number to which the Insertion effect is 
applied and the Part number to which the Plug-in Insertion 
effect is applied (when the PLG100-VH is installed).

Indicates the currently selected effect type for each effect 
block (page 179).

●

Indicates the amount of currently unused (available) memory 
(DRAM) for song recording.

●

Indicates the Plug-in board name and its MIDI port number 
page 265) at the right of the slot number. When PolyExpand 
(page 265) is set to on in the Utility mode, “P” is indicated at 
the left of the slot number.

Indicates the Part number to which the Insertion effect is 
applied and the Part number to which the Plug-in Insertion 
effect is applied (when the PLG100-VH is installed).

Indicates the currently selected effect type for each effect 
block (page 180).