Manualsbrain.com
  1. Manuais
  2. Marcas
  3. Yamaha
  4. Recording Equipment
  5. Manual Do Utilizador

Yamaha Recording Equipment Manual Do Utilizador

Download
Página de 300
Basic Operation
Knob (KN) and Control Slider (CS)
50
Owner’s Manual
Knob (KN) and Control Slider (CS)
Knob (KN)
You can change the brightness and tone characteristics of the current Voice or Performance in realtime by turning the knobs 
while you play. Rotating it to the right (clockwise) increases the program number, while rotating it to the left (counter-clockwise) 
decreases it. You can select the function set assigned to the knobs among the following seven sets by pressing the appropriate 
[KNOB CONTROL FUNCTION] button. 
Function sets assigned to the Knobs (KN)
* For Drum Voices, this affects the release time for all played notes, whether held or released.
** Available only when setting the Zone Switch to on in the Master Mode (page 137)
When pressing any of the [KNOB CONTROL FUNCTION] buttons, the lamp(s) of the buttons will light according to the above 
table and the status of the Knobs and Control Sliders (currently assigned functions and set values) is shown on the LCD display. 
The appearance of the knob in the display indicates the actual control status of the knob.  When a knob indication is black, the 
control knob on the panel affects the sound.  When an indication is white, moving the panel knob does not affect the sound, until 
the current value is reached (after which the indication turns black, indicating normal control).
Operation
Button of which the 
lamp is turned on
Functions controlled by each Knob
KN1 (Knob 1)
KN2 (Knob 2)
KN3 (Knob 3)
KN4 (Knob 4)
When pressing the [PAN/
SEND] button
[PAN/SEND] button
Pan (stereo position) 
of the Voice/
Performance
Reverb Send Level
Chorus Send Level
Tempo of the Song/
Pattern/Arpeggio 
playback
When pressing the [TONE] 
button
[TONE] button
Filter Cutoff 
Frequency (degree of 
brightness)
Resonance (the level 
of the signal in the 
area of the cutoff 
frequency)
Attack Time of the 
sound
Release Time of the 
sound (decay time 
after the key is 
released)*
When pressing the [ARP 
FX] button
[ARP FX] button
Swing degree of the 
Arpeggio playback
Gate time (length) of 
the Arpeggio 
playback
Velocity of the 
Arpeggio playback
Arpeggio playback 
time
When pressing the [EQ] 
button
[EQ] button
Low band of the 
Master EQ in the 
Voice/Performance 
mode, part EQ in the 
Song/Pattern mode
Low-mid band of the 
Master EQ in the 
Voice/Performance 
mode, Mid band of 
the Part EQ in the 
Song/Pattern mode
High-mid band of the 
Master EQ in the 
Voice/Performance 
mode.  (Not available 
in the Song/Pattern 
mode.)
High band of the 
Master EQ in the 
Voice/Performance 
mode, part EQ in the 
Song/Pattern mode
When pressing the [PAN/
SEND] button and the 
[TONE] button 
simultaneously
[PAN/SEND] button
[TONE] button
Function assigned from the [UTILITY] 
→
 [F4] 
CTLASN 
→
the Utility mode
Function assigned for each Voice from the 
[VOICE] 
→
 [EDIT] 
→
 [COMMON] 
→
 [F4] 
When pressing the [TONE] 
button and the [ARP FX] 
button simultaneously**
All the buttons are off
Function assigned for each Master from the [MASTER] 
→
 [EDIT] 
→
 Zone selection 
→
 [F5] KN/CS 
When pressing the [ARP 
FX] button and the [EQ] 
button simultaneously
[ARP FX] button
[EQ] button
Function assigned to the Master Effect parameters from the [UTILITY] 
→
 [F4] CTLASN 
→
 [SF5] MEF 
display.
KNOB
CONTROL
FUNCTION
SWING
CUTOFF
PAN
ASSIGN  A
GATE TIME
RESONANCE
REVERB
ASSIGN  B
VELOCITY
ATTACK
CHORUS
ASSIGN  1
UNITMULTIPLY
RELEASE
TEMPO
ASSIGN  2
LOW
KN 
1
LOW MID
KN 
2
HIGH MID
KN 
3
HIGH
KN 
4
 ARP FX
EQ
TONE
ASSIGN 
PAN/SEND
Turning these Knobs will affect the sound. 
Turning these Knobs will not affect the sound.