Cisco Systems RPS 675 Manual Do Utilizador

These warnings are translated into several languages in 

To prevent the switch from overheating, do not operate it in an area that 
exceeds the maximum recommended ambient temperature of 113°F (45°C). To 
prevent airflow restriction, allow at least 3 inches (7.6 cm) of clearance around 
the ventilation openings. Statement 17B

Before working on equipment that is connected to power lines, remove jewelry 
(including rings, necklaces, and watches). Metal objects will heat up when 
connected to power and ground and can cause serious burns or weld the metal 
object to the terminals. Statement 43

Attach only the Cisco RPS (model PWR675-AC-RPS-N1) to the RPS receptacle. 
Statement 100C

If a redundant power system (RPS) is not connected to the switch, install an RPS 
connector cover on the back of the switch. Statement 265

Do not work on the system or connect or disconnect cables during periods of 
lightning activity. Statement 1001

Read the installation instructions before connecting the system to the power 
source. Statement 1004