Cisco Systems RPS 675 Manual Do Utilizador
B-1
Cisco RPS 675 Redundant Power System Hardware Installation Guide
78-15201-04
A P P E N D I X
B
Connector and Cable Specifications
This appendix describes the cable connector that is used to connect the Cisco
Redundant Power System (RPS) 675 to a supported device. The cable
(CAB-RPS-1614=) is a 48-inch (1.2-meter) cable with a 16-pin connector on one
end and a 14-pin connector on the other end.
Redundant Power System (RPS) 675 to a supported device. The cable
(CAB-RPS-1614=) is a 48-inch (1.2-meter) cable with a 16-pin connector on one
end and a 14-pin connector on the other end.
and
show the
connectors, and
contains the pinout information.
Note
The connector is keyed to insert into the receptacle only in its correct orientation.
Figure B-1
14-Pin Connector Pinouts
14 13 12 11 10
9
8
1
2
3
4
5
6
7
Top of Connector (Logo Side)
50211