Heath Zenith SH-5412 Manual Do Utilizador

© 2008 HeathCo LLC 

598-1158-04

•  The light control requires 120-volts AC.
•  If you want to use Manual Mode, the control must be

wired through a switch.

•

•  This product is intended for use with the enclosed

gasket and with a junction box marked for use in wet
locations.

Light Control

•  Turns on lighting when motion is detected.
•  Automatically turns lighting off.
•  Bulb Saver™ - Extends bulb life by up to 4x standard

bulbs. Lights bulb to full bright in under 2 seconds.

•  Photocell keeps the lighting off during daylight hours.
•  LED indicates motion was sensed (day or night).

Plastic Hanger

Rubber Plug

Gasket

Mounting Strap

Mounting Bolt

2 Wire

Connectors

This package includes:

6 Screws

(3 sizes included)

* resets to Auto Mode at dawn.

10 5 1 

ON-TIME

Put  the  ON-TIME  switch  on  the
bottom of the sensor in the TEST
position.

ON-TIME

10 5 1 TEST

... back on.

1 Second OFF

Note: When first turned on wait about 1

1

/

2

minutes for

the circuitry to calibrate.

Manual  mode  only  works  at  night
because  daylight  returns  the  sensor
to AUTO.

Flip the light switch off for one second
then back on to toggle between AUTO
and MANUAL MODE.

Manual  mode  works  only  with  the
ON-TIME  switch  in  the  1,  5,  or  10
position.

Put the ON-TIME switch in the 1, 5,
or 10 minute position.

Mode:

On-Time:

Works:

Day

Night

5 Sec

x

x

1, 5, 10 min.

x

Until Dawn*

x

Model SH-5412

Meets the ENERGY STAR

®

guidelines

when used with 120 W Max bulbs.

2 Shells