Heath Zenith SH-5311 Manual Do Utilizador

Light Control

Cover Plate 

Gasket

© 2008 HeathCo LLC 

598-1343-00

•  The light control requires 120-volts AC.
•  This fixture is designed for wall mounting only.
•  If you want to use Manual Override, the control must 

be wired through a switch.

• 

•  This product is intended for use with the enclosed 

gasket and with a junction box marked for use in wet 
locations.

•  The backplate has knockouts so the sensor can be 

mounted on most junction boxes.

•  In some applications a universal adaptor plate may 

be needed. Adaptors are available at Home Centers 
and Electrical Supply Stores.

S-hook

1 Halogen 

Lamp

Model SH-5311

3 Wire

Connectors

6 Screws

(3 sizes included)

This package includes:

* resets to Auto Mode at dawn.

10 5 1 

ON-TIME

Put  the  ON-TIME  switch  on  the 
bottom of the sensor in the TEST 
position.

ON-TIME

10 5 1 TEST

... back on.

1 Second OFF 

Note: When first turned on wait about 1 

1

/

2

 minutes for 

the circuitry to calibrate.

Manual  mode  only  works  at  night 
because  daylight  returns  the  sensor 
to AUTO.

Flip the light switch off for one second 
then back on to toggle between AUTO 
and MANUAL MODE.

Manual  mode  works  only  with  the 
ON-TIME  switch  in  the  1,  5,  or  10 
position.

Put the ON-TIME switch in the 1, 5, 
or 10 minute position.

Mode:

On-Time:

Works:

Day

Night

5 Sec

x

x

1, 5, 10 min.

x

Until Dawn*

x

•  Turns on lighting when motion is detected.
•  Automatically turns lighting off.
•  Bulb Saver™ - Extends bulb life by up to 4x standard 

bulbs. Lights bulb to full bright in under 2 seconds.

•  Photocell keeps the lighting off during daylight hours.
•  LED indicates motion was sensed (day or night).