Kenwood KDC-W6531 Manual Do Utilizador

English

   

|

   

•  If you experience problems during installation, 

consult your Kenwood dealer.

•  If the unit fails to operate properly, press the Reset 

button. The unit returns to factory settings when 
the Reset button is pressed. 

•  Press the reset button if the disc auto changer fails 

to operate correctly. Normal operation should be 
restored.

•  The characters which can be displayed by this 

unit are A-Z 0-9 @ " ‘ ` % & * + – = , . / \ < > [ ] ( ) : ; 
^ - { } | ~

 .

•  The illustrations of the display and the panel 

appearing in this manual are examples used to 
explain more clearly how the controls are used. 
Therefore, what appears on the display in the 
illustrations may differ from what appears on 
the display on the actual equipment, and some 
of the illustrations on the display may represent 
something impossible in actual operation.

If the faceplate of this unit is stained, wipe it with a 
dry soft cloth such as a silicon cloth.
If the faceplate is stained badly, wipe the stain off 
with a cloth moistened with neutral cleaner, then 
wipe neutral detergent off.

•  Applying spray cleaner directly to the unit may affect its 

mechanical parts. Wiping the faceplate with a hard cloth 
or using a volatile liquid such as thinner or alcohol may 
scratch the surface or erases characters.

If the terminals on the unit or faceplate get dirty, 
wipe them with a dry, soft cloth.

This unit is initially set on the Demonstration mode.
When using this unit for the first time, cancel the 
<Demonstration mode Setting> (page 31).

Refer to 

A group on the Instruction manual of DAB 

Tuner KTC-9090DAB (optional accessory) for the 
control method of DAB Tuner function.
However, the following control methods of the 
function for this unit may be differed from the 
Instruction manual; therefore, refer to the following 
supplemental instruction.
<Auto Ensemble Memory Entry>

1.  Select the preset band for Auto Ensemble 

Memory Entry.

2.  Press the [AME] button for at least 2 seconds.

Open Auto Ensemble Memory Entry.
After storing in the memory finishes, the 
number of the pre-set buttons and the 
ensemble label are displayed.

At the operation to press [DISP] button, press [T.I] 
button.

Reset button

B64-2995-00_E_English_r0.Indd   5

B64-2995-00_E_English_r0.Indd   5

04.11.12   7:06:21 PM

04.11.12   7:06:21 PM