Lightolier A0302 Manual Do Utilizador

 READ AND UNDERSTAND THESE INSTRUCTIONS BEFORE INSTALLING FIXTURE 

This fixture is intended for installation in accordance with the National Electrical Code and local regulations.  To 

assure full compliance with local codes and regulations, check with your local electrical inspector before 

installation.  To prevent electric shock, turn off electricity at fuse box before proceeding. 

IS:7784 

 COMPANY

A. INSTALL MOUNTING FRAME IN CEILING USING ADJUSTABLE 
    MOUNTING BRACKET 

   (1) With MOUNTING BARS (order separately): 

18” – Cat. No. 1950; 27” – Cat. No 1951). 
Use rectangular slots as shown. 

(3) With 1 ½” channel (by others) 

Slide MOUNTING BARS or CHANNELS (by others) through slots in ADJUSTABLE MOUNTING BRACKET which will place the 
bottom of the MOUNTING FRAME approximately in line with the finished ceiling line. Final adjustments may be made by means of 
MOUNTING BRACKET SCREWS on inside of fixture. 

FIG. 1 

FIG. 3 

FIG. 2 

FIG. 4 

(2) With ¾” channel (by others)

 TELESCOPING 

MOUNTING BARS No. 7994 (order separately) may be 
used to secure MOUNTING FRAME (Fig.5). 

FIG. 5 

 T-Bar ANCHOR CLIPS 

ACCESSORY No. 1956 (order separately) may be used 
with 18” or 27” MOUNTING BARS or TELESCOPING 
MOUNTING BARS for quick mounting (Fig. 6) or simply 
wire MOUNTING BARS to ceiling members (Fig. 7) 

MOUNTING 

BAR 

T-BAR ANCHOR 

CLIPS 

ACCESSORY  

WIRE

MOUNTING 

BAR 

FIG. 6 

FIG. 7 

TELESCOPING 

MOUNTING BARS