Bad Boy Mowers 02.9812.0001C Manual Do Utilizador

To connect power and data:
Step 1. Connect data cable (DMX512 or Ethernet) from console to appropriate input connector at 

first luminaire in chain (

).

Step 2. If required, connect additional data cables from appropriate thru connectors to input 

connectors of remaining luminaires in chain.

Step 3. For DMX512 systems: At last luminaire in chain, install male termination connector at 

DMX512 THRU connector. (Luminaires and other devices on the same DMX512 chain may 
not function properly without termination.) Refer to 

on page 12.

Step 4. At each luminaire, connect AC Line Cord Cable Assembly from power input source.
Step 5. Dress and secure all cables so that they will not interfere with luminaire head or yoke 

movement.

* The Ethernet ports are not assigned as either In or Thru as the DMX512 ports are. Ethernet can be 

connected in any configuration.

Note:  If control data is active on both XLR and Ethernet connections, the fixture will follow the 
DMX512 commands coming from the XLR. 

DMX512 In

Power In

Power In

Power In

Termination

Connector

DMX512 Thru

DMX512 Thru

Ethernet

Power In

Power In

Power In

Ethernet

Ethernet