Verona VEFSGG 365 ND Manual Do Utilizador

IMPORTANT - PLEASE READ AND FOLLOW

✓

Before beginning, please read these instructions completely and carefully.

✓

Do not remove permanently affixed labels, warnings, or plates from the product. This

may void the warranty.

✓

Please observe all local and national codes and ordinances.

✓

Please ensure that this product is properly grounded.

✓

The installer should leave these instructions with the consumer who should retain

for local inspector's use and for future reference.

✓

The electrical plug should always be accessible.

Installation must conform with local codes or in the absence of codes, the National Fuel

Gas Code ANSIZ223.1 - Iatest edition. Electrical installation must be in accordance

with the National Electrical Code, ANSI/NFPA70 - latest edition and/or local codes. IN

CANADA: Installation must be in accordance with the current CAN/CGA-B149.1 National

Gas Installation Code or CAN/CGA-B149.2, Propane Installation Code and/or local codes.

Electrical installation must be in accordance with the current CSA C22.1 Canadian Electrical

Codes Part 1 and/or local codes.
INSTALLATION IN MANUFACTURED (MOBILE) HOME: The installation must conform

with the Manufactured Home Construction and Safety Standard, Title 24 CFR, Part 3280

[formerly the Federal Standard for Mobile Home Construction and Safety, Title 24, HUD

(Part 280)] or, when such standard is not applicable, the Standard for Manufactured Home

Installations, ANSI/NCSBCS A225.1, or with local codes where applicable.
INSTALLATION IN RECREATIONAL PARK TRAILERS: The installation must conform with

state or other codes or, in the absence of such codes, with the Standard for Recreational

Park Trailers, ANSI A119.5.
Installation of any gas-fired equipment should be made by a Iicensed plumber. A manual

shut-off valve must be installed in an accessible location in the gas line external to the appli-

ance for the purpose of turning on or shutting off gas to the appliance (In Massachusetts

such shutoff devices should be approved by the Board of State Examiners of Plumbers &

Gas Fitters).
If an external electrical source is utilized, the appliance, when installed, must be electri-

cally grounded in accordance with local codes or, in the absence of local codes, with the

national Electrical Code, ANSI/NFPA 70.

This range is supplied with a protective film on

steel and aluminium parts.

This film must be removed before installing/using the appliance.

FOR INSTALLER ONLY

THIS RANGE IS FOR RESIDENTIAL USE ONLY

• INSTALLATION INSTRUCTIONS

IMPORTANT - PLEASE READ AND FOLLOW

DOUBLE OVEN GAS RANGE

for residential use only

Model:

VEFSGG 365 ND..