Whirlpool C10748446C Manual Do Utilizador

The Steam Clean feature is designed for light oven cavity bottom 
cleaning on models that have hidden bake in both ovens. 
Allow the range to cool to room temperature before using the 
Steam Clean feature. If your oven cavity is above 100°F (38°C), 
“Oven Cooling” will appear in the display and the Steam Clean 
feature will not activate until it cools down.

■

Remove all racks and accessories from the oven cavity.

■

For best results, use 16 oz (473 mL) of distilled or filtered water.

■

The Steam Clean feature will take a total of 20 minutes. A beep 
will sound at the end of the cycle.

IMPORTANT: Because the water in the oven bottom is hot, do not 
open the oven door during the Steam Clean cycle. 
Press any CANCEL at any time to end the cycle. The display will 
return to the time of day.

■

Once the Steam Clean cycle is complete, remove all remaining 
water in the bottom of the oven with a sponge or cloth.

■

Wipe any remaining moisture from the oven door interior, oven 
cavity interior sides, and cooktop.

■

Use a soft brush or nylon scrubber to wipe the oven interior. 
This may help with more stubborn stains.

■

It is recommended to use distilled or filtered water, as tap water 
may leave mineral deposits on the oven bottom. Use a cloth 
soaked with vinegar or lemon juice to remove any mineral 
deposits that may be left after the Steam Clean cycle.

■

If the oven is heavily soiled, use the Self-Clean cycle. The 
Steam Clean cycle may be used first to eliminate most of the 
debris, resulting in a more effective self-clean.

1. Remove all racks and accessories from the oven cavity.
2. Press STEAM CLEAN.
3. Use the number keypad to select the desired oven.
4. Open the oven door of the selected oven and pour 16 oz 

(473 mL) of distilled or filtered water to the oven bottom. Then 
close the oven door.

5. Press START for the desired oven.
6. After 20 minutes, a beep will sound to signal the end of the 

cycle. Press CANCEL for the desired oven to clear the display.

7. Remove any excess water with a sponge or cloth and wipe 

down oven interior. If needed, use a non-scratch copper 
scrubbing pad to remove stubborn soils.

IMPORTANT: Before cleaning, make sure all controls are off and 
the oven and cooktop are cool. Always follow label instructions on 
cleaning products. For additional information, you can visit the 
Frequently Asked Questions (FAQs) section of our website at 
www.whirlpool.com. In Canada, refer to the Customer Service 
section at www.whirlpool.ca.
Soap, water and a soft cloth or sponge are suggested first unless 
otherwise noted.

EXTERIOR PORCELAIN ENAMEL SURFACES (on some 
models)

Food spills containing acids, such as vinegar and tomato, should 
be cleaned as soon as the entire range is cool. These spills may 
affect the finish.
Cleaning Method:

■

Glass cleaner, mild liquid cleaner or nonabrasive scrubbing 
pad: 



Gently clean around the model/serial/rating plate because 
scrubbing may remove numbers.

■

affresh

®

 Kitchen and Appliance Cleaner Part Number 

W10355010 (not included):



See the “Accessories” section for more information.

STAINLESS STEEL (on some models)

NOTE: To avoid damage to stainless steel surfaces, do not use 
soap-filled scouring pads, abrasive cleaners, affresh

®

 Cooktop 

Cleaner, steel-wool pads, gritty washcloths or abrasive paper 
towels. Damage may occur to stainless steel surfaces, even with 
one-time or limited use.
Cleaning Method:

Rub in direction of grain to avoid damaging.

■

affresh

®

 Stainless Steel Cleaner Part Number W10355016: 



See the “Accessories” section for more information.

METALLIC PAINT (on some models)

Do not use abrasive cleaners, cleaners with bleach, rust removers, 
ammonia or sodium hydroxide (lye) because paint surface may 
stain.