Whirlpool GGG390LX Manual Do Utilizador

This manual covers different models. The range you have purchased may have some or all of the items listed. The locations and 
appearances of the items shown here may not match those of your model.

When power is first supplied to the range, or if a power failure has 
occurred, 12:00 will appear on the display. See “Clock” in the 
“Settings” section to set time of day.

When the oven is not in use, the display shows the time of day.

The Cancel pad stops any function except the Clock, Timer and 
Control Lock.

While the oven doors are closed, press OVEN LIGHT to turn the 
lights on and off. Both oven lights will come on when either door 
is open. The oven lights will not come on during the Self-Clean 
cycle.

The Kitchen Timer can be set in hours or minutes up to 9 hours 
and 59 minutes, and counts down the set time. The Kitchen 
Timer does not start or stop the oven.

1. Press TIMER SET/OFF pad.

“Set TIMER” will scroll down the upper text display area, and 
the clock will display “--:--” with the colon flashing.

2. Press the Temp/Time “up” or “down” arrow pads until the 

desired time is reached.

“Press TIMER” will scroll down the upper text display area.

3. Press TIMER SET/OFF to start the timer. The colon stops 

flashing, and the time begins counting down. “TIMER 
STARTED” will scroll down the upper text display area.

The last minute of the timer countdown will be displayed in 
seconds.

At the end of the set time, one long beep will sound, and 
“TIMER End” will be displayed.

4. Press TIMER SET/OFF to clear the display.

NOTE: A reminder beep will sound until the Kitchen Timer is 
canceled.

Press the TIMER SET/OFF pad.

SETTINGS enables you to personalize audible tones and oven 
operation to suit your needs. After completing your adjustments, 
press CANCEL or wait 30 seconds for the display to show the 
time of day.

The Energy Save mode deactivates the display to reduce energy 
consumption.

1. Press and hold SETTINGS for 3 seconds. “Energy save on.” 

will appear in the upper text area.

2. The setting will be activated after 5 minutes.

Any mode may be used with the range in Energy Save by 
simply selecting the desired mode.

1. Press and hold SETTINGS for 3 seconds. “Energy save off.” 

will appear in the upper text area.

2. The clock will reappear in the display, and the range can be 

operated as usual.

The temperature is factory preset to Fahrenheit, but can be 
changed to Celsius. 

1. Press SETTINGS once. 

“TEMP UNIT” appears in the upper text area while 
“FAHRENHEIT. Press (^) for Celsius” will scroll twice from 
right to left in the lower text area.

A

B

C

D

E

F G

H

I

K

L

M

J

N

O

P