Maytag W10560155B Manual Do Utilizador

The Cycle Status Lights show the progress of a cycle. At 

each stage of the process, you may notice sounds or pauses 

that are different from traditional washers.

When the START/Pause/Unlock button is pressed, 

the washer will first perform a self-test on the lid lock 

mechanism. You will hear a click, the basket will make a 

slight turn, then lid will unlock briefly before locking again. 
Once the lid has locked the second time, the washer will 

use short, slow spins to estimate the load size. These 

sensing spins may take 2 to 3 minutes before water is 

added to the load and you may hear the hum of these 

spins. If the Sensing light is on, the washer is working 

properly. You will hear the motor turn the basket in short 

pulses to thoroughly wet the load. The washer will then 

move the load briefly, pause to allow water to soak into 

the load, and resume adding water. This process may 

repeat until the correct amount of water has been added 

for the load. You may also hear water flowing through the 

dispenser, adding detergent to the load. 
NOTE: Avoid opening the lid during sensing. The sensing 

process will start over when the washer is restarted. The 

Sensing light may also come on during the Wash portion 

of the cycle. This is normal.

You will hear the motor and washplate moving the load. 

Unlike traditional washers, the load is not covered with 

water. Low-water cleaning means concentrated cleaning. 

Rather than diluting detergent as done in an agitator-style 

washer, this washer delivers the detergent directly to the 

soils. The motor sounds may change at different stages 

in the cycle. The wash time is determined by the selected 

soil level.

Select the most suitable setting for your load. For heavily 

soiled and sturdy fabrics, select Extra Heavy Soil Level for 

more wash time, if needed. For lightly soiled and delicate 

fabrics, select Light Soil Level for less wash time, if needed. 

Lighter soil level setting will help reduce tangling and 

wrinkling. 

Wash Temp senses and maintains uniform water 

temperatures by regulating incoming hot and cold water. 
Select a wash temperature based on the type of fabric 

and soils being washed. For best results and following the 

garment label instructions, use the warmest wash water safe 

for your fabric.  
•Onsomemodelsandcycles,warmandhotwatermaybe

cooler than your previous washer.

•Eveninacoldandcoolwaterwash,somewarmwater

may be added to the washer to maintain a minimum 

temperature.   

Use the Wash Cycle knob to select available cycles on your 

washer. Turn the knob to select a cycle for your laundry load. 

See “Cycle Guide” for detailed descriptions.

The following options may be added to most cycles. 

This option can be used to automatically add a second  

rinse to most cycles.
FABRIC SOFTENER ADDED

This option must be set to “On” if using fabric softener. 

Press to start the selected cycle; press again to pause the  

cycle and unlock the lid. Press and hold 3 sec to cancel a 

cycle.
NOTE: If the washer is spinning, it may take several minutes  

to unlock the lid. Press and hold 3 sec to cancel a cycle.

Not all features and options are available on all models.  

Appearance may vary.