Baratza B-Virtuoso Manual Do Utilizador

Use the bristle brush (included with your grinder)  

to remove any loose coffee residue on the ring 

burr and the center cone burr mounted within the 

motor housing.  Wash the silicone seal in warm 

soapy water and dry. 

Ensure that the black adjustment ring is rotated 

counterclockwise as far as it will go.  Replace the 

burr by lining up the red tab on the burr with the 

rectangular cutout on the black adjustment ring.  

Wiggle and push down firmly on the ring burr to 

ensure that it seats properly.

After replacing the burr, replace the silicone seal 

by lining up the two slots in the silicone seal with 

the small tabs on the top of the ring burr and slide 

the seal onto the ring burr.

To replace the bean hopper, line 

up the two small tabs on the base 

of the hopper with their respective 

slots in the top of the grinder hous-

ing and insert the hopper into the 

grinder.  Once the hopper is in place 

rotate it clockwise to your desired 
grind 

setting.