Blomberg CTE 36500 Manual

10

When the cooktop is connected to the electrical voltage 
supply all lights and digits turn on to indicate a proper 
activation. This operation will be completed after few 
seconds, the control turns off automatically. Now the 
cooktop is ready for operations.

! "^ ^@;=>Q&" ^  
are locked (see that the lock led is on and turns off after 
a few seconds).

 ^ ^   @;*<;Q &"       &  ^
single zone available for selection. 

All the displays show power level “0”, if no actions are 
performed the control shuts down again after about 10 
seconds.

 ^^ @;*Q&"`  ^
desired zone: the HOT SURFACE (ref.3) indication 
 j ^%   

5b

5a

4

1

2

3

Touch the slide bar to set the power level (levels 0 to 
q      %   ^ {       "
touching the desired value. If your cooktop model has 
    %  ^ ?;|!} @JQ < @XQ &"    ^
power level (ref.7).

The display (ref.4) show the power level, updated in  
real time.

After a 5 seconds time-out the value is accepted, the 
~; }€=!     j ^   
steady.

 ^@;*Q&"  {^   ^J 
expires.

7

Once a cooking zone has been selected, touch the 
@;| !:?Q &" ‚        ^  
Power Scale (ref.9) then set the power level in the 
usual way.

8

The control uses only the 15% of the available power, 
divided in 0 to 9 steps with a better accuracy. 

Keep in mind that power level 9 in this special mode 
correspond exactly to level 4 in the standard range.

^#   ^^@;|!:?Q&"  
in order to disable the Low Power Scale and restore the 
standard one, without switching off the zone.