Thermador PRD486GDHU Manual Do Utilizador

Página de 20
49
1.800.735.4328   |   THERMADOR.COM
PRO hARMONY RANGES
iNSTALLATiON OPTiONS
Thermador Pro Harmony
® Ranges feature a bold, 
professional design and a compact, 24-inch depth 
profile that creates a seamless look within standard 
cabinetry. These ranges can be installed in a wall or 
island installation.
BAckGuARD
36-inch Thermador Pro Harmony Ranges require an  
accessory backguard. Choices include a 9-inch low 
backguard or a 22-inch high backguard with shelf. 
Either backguard must be attached before sliding the 
range into the final installed position. An island trim is 
included for covering the backguard mounting flanges 
for island installations, where there is a minimum of 12" 
of horizontal clearance behind the island trim.
cAuTiON:
 To avoid possible burn or fire hazard, a 
backguard designed specifically for this range must be 
installed whenever the range is used.
NATuRAL GAS OR LP
Thermador Dual-Fuel Pro Harmony Ranges are shipped 
by the factory to operate on natural gas. They must be 
converted for use with propane. Verify that the type of 
gas being used at the installation site matches the type 
of gas used by the appliance. If the location/job site 
requires conversion from natural gas to propane (LP), 
order PALPKITHC. Field conversion must be done by 
qualified service personnel only. Please refer to the LP 
Conversion Instructions packed with product for further 
information.
iMPORTANT
We strongly recommend that a Thermador  
Professional Wall or Island Hood or Custom Insert be 
installed with all Thermador Pro Harmony Ranges. 
Downdraft ventilation should not be used. Do not 
install a microwave-hood combination above the 
cooktop, as these types of units do not provide 
the proper ventilation and are not suitable for use 
with Thermador Pro Harmony Ranges. Refer to the 
Ventilation section or www.Thermador.com for a 
complete selection of Professional ventilation options, 
blowers, and accessories.
Due to the high surface temperature output of the Pro 
Harmony Ranges, the HPWB Professional Series Wall 
Hoods or the Professional Series Custom Inserts are 
recommended ventilation solutions for these ranges. 
The PH Professional Series Wall Hoods are also a viable 
option, however the 27" depth of the PH Series may 
not be suitable to all applications.
36-INCH CuTOuT AND RANGE DIMENSIONS 
PRO hARMONY
® RANGES  
36-iNch DuAL-FuEL
Model: PRD364GDhu
*min. 30"- 40"
36"
19
13
/
16
"
8
1
/
8
"
3
3
/
16
"
**min. 10"
24"
Gas and Electric connections
27
1
/
4
"
35
15
/
16
"
27
5
/
8
"
44
7
/
8
"
24
3
/
4
"
23"
35
7
/
8
"-
36
3
/
4
"
  *  30" minimum clearance above cooking surface to  
non-combustible surface. Minimum clearance above 
cooking surface to combustible surface is 40".
**  10" minimum clearance from cooking surface to 
combustible side walls.
Note: Most hoods contain combustible components that 
must be considered when planning the installation.
measurement in inches
measurement in inches