GE 164D2966P205-1 Manual Do Utilizador
25
How to Set the Oven When Using the Temperature Probe
The display will flash if the probe is inserted
into the outlet and you have not set a probe
temperature and pressed START.
into the outlet and you have not set a probe
temperature and pressed START.
1. Insert the probe
into the meat.
2. Plug the probe
into the outlet
in the oven.
Make sure it’s
pushed all the
way in. Close
the oven door.
in the oven.
Make sure it’s
pushed all the
way in. Close
the oven door.
3. Press PROBE.
4. Press the number pads to set the internal
meat temperature.
5. Press BAKE.
6. Press the number pads to set the oven
temperature.
7. Press START.
The word “LO” will be in the display.
After the internal temperature of the
meat reaches 100°F., the changing
internal temperature will be shown
in the display.
After the internal temperature of the
meat reaches 100°F., the changing
internal temperature will be shown
in the display.
8. When the internal temperature of the
meat reaches the temperature you have
set, the probe and the oven turn off and
the oven control signals. To stop the
signal, press CLEAR/OFF. Use hot pads
to remove the probe from the food. Do
not use tongs to pull on it–they might
damage it.
set, the probe and the oven turn off and
the oven control signals. To stop the
signal, press CLEAR/OFF. Use hot pads
to remove the probe from the food. Do
not use tongs to pull on it–they might
damage it.
CAUTION: To prevent possible burns, do not
unplug the probe from the outlet until the oven has
cooled. Do not store the probe in the oven.
unplug the probe from the outlet until the oven has
cooled. Do not store the probe in the oven.
NOTE: You can use the timer even though you
cannot use timed oven operations.
cannot use timed oven operations.
To change the oven temperature during the
roasting cycle, press BAKE and set the new
temperature.
roasting cycle, press BAKE and set the new
temperature.
CLEAR
OFF
START
BAKE
P R O B E
Roasting with the Pr
obe