Parasound JC 2 Manual Do Utilizador

If you turn the JC 2 BP volume control knob manually while Bypass is selected you will not

hear a volume change. But you did make a new volume setting and it will be instantly audible
when you select a non-Bypass input. The resulting blast of sound could be loud enough to
damage your speakers.

How to Cancel or “Un-assign” Bypass

Once you have assigned an input for Bypass mode it is possible to revert that input back to
normal operation. You will only need to do this if you change the way you have connected your
surround processor or receiver.

Please be sure the JC 2 BP volume control knob is turned down before proceeding.

If  you  turned  the  volume  knob  manually  to  a  new  position  while  an  input  assigned for  Bypass
was  selected  you  did  not  hear  any  volume  change.    However,  the  new  volume  level  will  be
instantly  audible  when  you  restore  the  Bypass  input  to  its  normal,  non-Bypass,  function.  The
resulting blast of sound could be loud enough to damage your speakers.

To  cancel  the  Bypass  mode  for  any  input,  repeat  the  same  procedure  as  the  Bypass
assignment:

Press the “B” key

Press the “P” key

3- Press the Input number key for the input you want to revert to normal function

When the Bypass assignment is canceled the amber Bypass indicator will no longer glow.

Note: If you accidentally press the wrong input number key that input will now be assigned to
the Bypass function. You can cancel it by first pressing

“B” key, then “P” key and finally the