Thermador 9000039271 Manual Do Utilizador

The dishwasher must be properly grounded before
operating. This appliance must be connected to a
grounded metal permanent wiring system, or an
equipment grounding conductor must be run with the
circuit conductors and connected to the equipment
grounding terminal or lead on the dishwasher. Make
sure that the dishwasher is connected to a suitable
ground in compliance with all local codes or, in the
absence of a local code, with the NATIONAL ELEC-
TRICAL CODE in the United States or the
CANADIAN ELECTRIC CODE C22.1-latest edition in
Canada as well as any provincial/state or municipal
or local codes that apply.

1. Retrieve the strain relief plate, and install a strain

relief (not supplied) into the opening on the strain
relief plate. NOTE: Orient the strain relief as
shown in Figure 24.

2. Pass the electrical supply cable through the strain

relief, as shown in Figure 25. Leave 3 - 4 inches of
insulated wire extending through the strain relief
plate.

3. Tighten the strain relief screws.
4. Slide the strain relief plate into the junction box,

and secure it to the junction box with the supplied
screw.

(Continued on next page)

Strain Relief Plate