Thermador 9000039271 Manual Do Utilizador

If the dishwasher is to drain either directly into the
household drain plumbing or through an air gap,
install a dishwasher connection piece under the sink,
as shown in Figure 8, letter A.

If local ordinances require an air gap, as shown in
Figure 9, letter B, install it according to the
manufacturer’s instructions.

If a disposer is to be installed, as shown in Figure 10,
letter C, install it according to the manufacturer’s
instructions. Whether the disposer is newly installed
or existing, remove the disposer’s dishwasher drain
connection plug.

A

B

Dishwasher preparation involves four tasks:
•   Installing the Mounting Brackets
•   Removing the Toe Panel
•   Installing the 90° elbow fitting
•   Junction Box Preparation

: 

Before installing the supplied mounting

brackets (letter E in the Materials Supplied section of
this manual), decide which method of securing the
dishwasher into its enclosure will be used. Once the
mounting brackets are installed on the dishwasher,
removing them is difficult and will damage the
mounting brackets and the dishwasher.
The dishwasher can be secured into its enclosure in
two ways:
1. Top Mount is used for countertops made of wood

or other materials that can easily drilled. Orient the
mounting  brackets as shown in Figure 11, letter
A, and position the two small tabs on the mounting
brackets over the two slots on the dishwasher’s
front corners. Push the mounting brackets down
firmly to insert the tabs into the slots.

2. Side Mount is used for countertops made of

marble, granite, or other very hard materials that
cannot be easily drilled. Bend the mounting
brackets  along the small holes and in the same
direction as the two small tabs. Orient the
mounting brackets as shown in Figure 11, letter B,
and position the two small tabs on the mounting
brackets over the two slots on the dishwasher’s
front corners. Push the mounting brackets down
firmly to insert the tabs into the slots.