KitchenAid KCM1203 Utilização E Cuidado

13

2.  The strength (REG or BOLD) indicator will 

flash. Press the “+” (plus) or “-” (minus) 

button to select the brew strength desired 

(REG or BOLD). 

3.  Press the SET button to program the 

Brew Strength setting. Two short beeps 

will sound, indicating programming is 

complete. The programmed strength will 

remain active until steps 1-3 are repeated 

or power is interrupted for more than  

60 seconds.

Automatic Shutoff
For glass carafe models only, the coffee 

maker can be programmed to keep coffee 

warm for a specific length of time and 

temperature. This feature is not available on 

thermal carafe models.
NOTE: If you do not complete the 

programming steps within 10 seconds, the 

settings will be maintained and the coffee 

maker will exit to the Default mode. 
To program and activate the Warm Timer/

Temperature setting:
1.  Press the MENU button 4 times to enter 

the “Warm Timer / Temperature” mode. 

The “Warm” indicator and time digits  

will flash until this programming cycle  

is complete.

2.  Press the “+” (plus) or “-” (minus)  button 

to select the length of warm time desired. 

The time range can be selected between  

0.5 and 4 hours in 30-minute increments.

3.  Press the SET button. The “Warm” 

indicator and temperature setting (LOW, 

MED, or HIGH) will flash. Press the “+” 

(plus) or “-” (minus) button to select the 

temperature (LOW, MED, or HIGH).

4.  Press the SET button to program the 

Warm Timer/ Temperature setting. 

Two short beeps will sound, indicating 

programming is complete. The 

programmed temperature will remain 

active until steps 1-4 are repeated or 

power is interrupted for more than  

60 seconds.

Brew Time Again
After setting up your Automatic Brew Time, 

you can use the following directions to reuse 

your previously programmed time setting.
To re-activate the Programmed Automatic  

Brew Time:
1.  Press the MENU button 1 time to enter  

the “Auto Brew Timer” mode. The “Auto” 

and “OFF” indicators will flash. Press the 

“+” (plus) or “-” (minus) button to select 

“ON”. Press the SET button. 

2.  The hours digits will flash next. Press the 

SET button to set the hour.

3.  The minutes digits will flash next. Press  

the SET button to set the minutes.

4.  The “AM/PM” indicators will flash next. 

Press the SET to select AM or PM. 

Two short beeps will sound indicating 

programming is complete.

5.  The “Auto” indicator will turn on and the 

coffee maker will begin brewing at the 

programmed time. The time that is set  

will be displayed for 3 seconds as a 

reminder of the set time. The programmed 

time will remain active until steps 1-4  

are repeated or power is interrupted  

for more than 60 seconds. 

     NOTE: To reactivate the programmed 

time, press and hold the BREW  

button. The “Auto” indicator will turn  

on and the coffee maker will begin  

brewing at the programmed time.

Brew Strength
The coffee maker can be programmed  

to brew coffee at regular (REG) or  

bold (BOLD) strengths.
NOTE: If you do not complete the 

programming steps within 10 seconds,  

the settings will be maintained and the  

coffee maker will exit to the default mode.
To program and activate the Brew Strength:
1.  Press the MENU button 2 times to enter 

the “Brew Strength” mode. The “Brew 

Strength” indicator will flash until this 

programming cycle is complete.

W10474602B_Coffee Maker.indd   13

6/8/12   1:18 PM