DeLonghi ECAM26455M Manual De Instruções

9

Description of the milk container
(page 3 -     C   )
C1.  Milk container lid
C2.   Froth adjustment dial 
C3.   CLEAN button
C4.   Frothed milk spout (adjustable)
C5.   Milk carafe
C6.   Milk intake tube

Description of the accessories
(page 2 -     D   )

D1.  Pre-ground coffee measure

D2.   Cleaning brush 

A18. Water filter (certain models only)

D3.   Cappuccino maker/hot water spout

D4.   Power cable

D5.   “Total Hardness Test” indicator paper
D6.   Descaler

After  removing  the  packaging,  make  sure  the  product  is 

complete and undamaged and that all accessories are present. 

Do not use the appliance if it is visibly damaged.  
Contact De’Longhi Customer Experience.  

When  installing  the  appliance,  respect  the  following  safety 

warnings:

•  The appliance gives off heat.

 

After positioning the appliance on the worktop, leave a 

space of at least 1.18 in / 3 cm between the surfaces of 

the appliance and the side and rear walls and at least 5.9 

in/ 15 cm above the coffee maker.

•  Water penetrating the coffee maker could cause damage.  

  

Do not place the appliance near taps or sinks. 

•  The appliance could be damaged if the water it contains 

freezes.  

  

Do  not  install  the  appliance  in  a  room  where  the 

temperature could drop below freezing point. 

•  Arrange the power cable in such a way that it cannot be 

damaged  by  sharp  edges  or  contact  with  hot  surfaces 

(e.g. electric hot plates).

Check  that  the  mains  power  supply  voltage  corresponds  to 
the value indicated on the rating plate on the bottom of the 

appliance.
If the power socket does not match the plug on the appliance, 
have the socket replaced with a suitable type by a qualified 
professional.

•  Coffee has been used to factory test the appliance and it

is therefore completely normal for there to be traces of 
coffee in the mill. 

 

The machine is, however, guaranteed to be new. 

•  You should customise water hardness as soon as possible 

following  the  instructions  in  the  section  “Setting  the 
water hardness” on page 18.

1.  Insert the power cable connector into the socket at the 

back of the appliance and connect the appliance to the 
mains  electricity  supply  (fig.  1).  Make  sure  the  main 
switch at the back of the appliance is pressed (fig. 2). 

You  must  first  choose  the  language  (the  languages  scroll 
through at intervals of about 3 seconds).
2.  When  “English”  appears,  press  and  hold  the 

 

button  (fig.  3)  for  a  few  seconds  until “English  set”  is 
displayed.  

Follow the instructions displayed by the appliance:
3.   “FILL TANK!”: remove the water tank (fig. 4), fill to the 

MAX line with fresh water then replace in the appliance. 

4.   “INSERT WATER SPOUT!”: Check that the hot water spout 

is  inserted  on  the  nozzle  and  place  a  container  with  a 
minimum capacity of  3.4 oz / 100 ml underneath (fig. 6).

5.   “Hot water Press OK?” is displayed; 
6.  Press  the 

  button  to  confirm  (fig.  3).  The 

appliance  delivers  water  from  the  spout  then  goes  off 
automatically.   

The coffee maker is now ready for normal use. 

•  When using the appliance for the first time, you need to

make  4-5  cups  of  coffee  or  4-5  cappuccinos  before  the 
appliance starts to give satisfactory results.

•  To help reduce the buildup of limescale in the appliance 

and soften the water taste, we recommend installing a 
water filter as described in the section “WATER FILTER”.  

 

If your model is not provided with a filter, you can request 
one from De’Longhi Customer Experience.