DeLonghi ECAM26455 Manual Do Utilizador

10

When you access the programming menu by pressing the MENU/ESC 
button, the following menu items are available: 

Rinsing
Use this function to deliver hot water from the spout to heat the internal 
circuit and make the coffee delivered hotter. 
To enable the function, proceed as follows:
1.   Press the MENU/ESC button to enter the menu; 
2.   Press the HOT MILK or LATTE button (fig. 8) until “Rinsing” 

is displayed; 

3. Press 

the 

 button. The message “Confirm?” is 

displayed; 

3. Press 

the 

 button (fig. 3). Hot water flows out of 

the spout, heating the internal circuit and making the 
coffee delivered hotter.  

Descale
For instructions on descaling, see page 17. 

Adjust time
To adjust the time on the display, proceed as follows:
1.   Press the MENU/ESC button to enter the menu;
2.   Press the HOT MILK or LATTE button (fig. 8) until “Adjust 

time” is displayed;

3.   Press the 

 button (fig. 3);

4.   Press the HOT MILK or LATTE button (fig. 8) to change 

the hours;

5.   Press the 

 button to confirm;

6.   Press the HOT MILK or LATTE button (fig. 8) to change 

the minutes;

7.   Press the  

 button to confirm.

This sets the time. Press the MENU/ESC button to exit the menu.

Auto-off
The appliance is set to turn off automatically if not used for 2 
hours.
The time can be changed so that the appliance switches off 
after 15 or 30 minutes, or after 1, 2 or 3 hours. 
To re-programme Auto-off, proceed as follows:
1.   Press the MENU/ESC  button to enter the menu;
2. Press 

the 

HOT MILK or LATTE button (fig. 8) until “Auto-

off” is displayed;

3.   Press the 

  button;   

4. Press 

the 

HOT MILK or LATTE button (fig. 8) until the 

desired operation time is displayed (15 or 30 minutes, or 
1, 2 or 3 hours);

5. Press 

the 

 button to confirm;   

6. Press 

the 

MENU/ESC  button to exit the menu. 

Auto-off is programmed. 

Auto-start
You can set the auto-start time in order to have the appliance 
ready at a certain time (for example in the morning) so you can 
make coffee immediately.  

To enable this function, the time must already have been set 
correctly. 

To enable Auto-on, proceed as follows:
1.   Press the MENU/ESC button to enter the menu;
2.   Press the HOT MILK or LATTE button (fig. 8) until “Auto-

start” is displayed; 

3.   Press the 

 button.  “Enable?” is displayed; 

4. Press 

the 

 button to confirm; 

5.   Press the HOT MILK or LATTE button to choose the hours;
6.   Press the 

 button to confirm; 

7.   Press the HOT MILK or LATTE button (fig. 8) to change 

the minutes;

8.   Press the 

 button to confirm; 

9.   Press the MENU/ESC button to exit the menu.
Once the time has been confirmed, enabling of auto-start is 
indicated by the  

  symbol displayed alongside the time 

and under the Auto-start item in the menu. 
To disable the function:
1.  Select auto-start from the menu;
2. Press 

the 

 button. “Disable?” is displayed;  

3. Press 

the 

 button to confirm.  

The 

  symbol is no longer displayed. 

Setting the temperature
To modify the temperature of the water used to make the 
coffee, proceed as follows:
1. Press 

the 

MENU/ESC button to enter the menu;

2. Press 

the 

HOT MILK or LATTE button (fig. 8) until “Set 

temperature” is displayed;

3. Press 

the 

 button; 

4.   Press the HOT MILK or LATTE button until the required 

temperature (

●= low, ●●●● = high) is displayed; 

5.   Press the 

 button to confirm;  

6.   Press the  MENU/ESC  button to exit the menu.

Energy Saving
Use this function to enable or disable energy saving mode.
When enabled, the function reduces energy consumption in 
compliance with European regulations. To disable (or enable) 
“energy saving” mode, proceed as follows:
1. Press 

the 

MENU/ESC button to enter the menu;

2. Press 

the 

HOT MILK or LATTE button (fig. 8) until “Energy 

saving” is displayed;

3. Press 

the 

 button. “Disable?” is displayed (or