DeLonghi ECAM45.760 Manual Do Utilizador

10

During rinsing, a little hot water flows from the coffee spouts. 
Avoid contact with splashes of water. 
•  To turn the appliance off, press the 

button (fig. 8).  

•  The message “Turning off, Please wait” is displayed: if fea-

tured, the appliance completes a rinse cycle and then goes 
off (standby).

If you will not be using the appliance for some time, unplug 
from the mains socket:
•  first turn the appliance off by pressing the 

button 

(fig. 8);

•  release the main switch at the back of the appliance (fig. 

2). 

Never press the main switch while the appliance is on.

When you access the settings menu by pressing the MENU/ESC 

button, scroll the menu items by pressing < or >  (fig. 9).

Use this function to deliver hot water from the spout to heat the 
internal circuit and make the coffee delivered hotter. 
To enable the function, proceed as follows:

1.   Press the MENU/ESC button to enter the menu;

2.   Press < or > (fig. 9) until “Rinsing” is displayed;

3.  Press the OK button: “Confirm?” will be displayed.

4.  Press the OK button (fig. 10): after a few seconds, hot water 

flows out of the spout, heating the internal circuit and ma-

king the coffee delivered hotter.  

Press any button to stop hot water delivery at any time.

For instructions on descaling, see page 18.

For instructions on how to install the filter, see the section 
“Water softener filter”  (page 19).

For instructions on how to replace the filter, see the section “Re-
placing the filter”  (page 20).

To adjust the time on the display, proceed as follows:

1.   Press the MENU/ESC button to enter the menu;

2.   Press < or > (fig. 9) until “Adjust time” is displayed;

3.   Press the OK button (fig. 10): the hours flash;

4.   Press < or > (fig. 9) to change the hours;

5.   Press the OK button to confirm: the minutes flash;

6.   Press < or > (fig. 9) to change the minutes;

7.   Press the OK button to confirm.
This sets the time. Press the MENU/ESC button to exit the menu.

You can set the auto-start time in order to have the appliance 
ready at a certain time (for example in the morning) so you can 
make coffee immediately. 

To enable this function, the time must already be set correctly.

To enable auto-start, proceed as follows:
1.   Press the MENU/ESC button to enter the menu;
2.   Press < or > (fig. 9) until “Auto-start” is displayed;
3.   Press the OK button. “Enable?” is displayed;
4.  Press the OK button to confirm;
5.   Press < or > to choose the hours;
6.   Press the OK button to confirm;
7.   Press < or > (fig. 9) to change the minutes;
8.   Press the OK button to confirm;
9.   Then press the MENU/ESC button to exit the menu.
Once the time has been confirmed, activation of auto-start is 
indicated by the  

 symbol displayed alongside the time. 

To disable the function:
1.  Select auto-start from the menu;
2.  Press the OK button. “Disable?” is displayed;
3.  Press the OK button to confirm.
The 

 symbol is no longer displayed.

Auto-off mode can be set, so that the appliance switches off 
when not used for 15 or 30 minutes, or 1, 2 or 3 hours. 
To programme Auto-off, proceed as follows:
1.   Press the MENU/ESC button to enter the menu;
2.  Press < or > (fig. 9) until “Auto-off” is displayed;
3.   Press the OK button;
4.  Press < or > (fig. 9) until the required operating time (15 

or 30 minutes, or 1, 2 or 3 hours) is displayed;

5.  Press the OK button to confirm;
6.  Then press the MENU/ESC button to exit the menu.
Auto-off is programmed. 

This function allows the cup warmer to be enabled or disabled.