Sterling 882 Manual Do Utilizador

filter, regulator, and shutoff valve are recommended components 
of your in-plant compressed air supply. 

 

You may need to install an accumulator in your air supply system 
to enhance blowback effectiveness if your system cannot 
consistently meet these requirements. Make sure you use full-sized 
1/2” diameter pipe or tubing when making connections. 

 
 

The controller you selected is shipped pre-wired to the hopper 
loader. Units are supplied with a power cord with plug wired to the 
control unit, ready to plug into an appropriately grounded three-
prong receptacle. 

 

Make sure that the material demand sensor is installed with the 
proper amount of clearance, and that it is free of obstructions. 

 

If the installation has the hopper loader wired directly to a power 
main, you must install a fused disconnect with lockout to allow 
safe operation and maintenance. Make sure all connections are 
tight.