Yamaha 006IPTO-F0 Manual Do Utilizador
114
Chapter 9—Input & Output Patching
DM1000 Version 2—Owner’s Manual
Patching the 2TR Digital Outputs
You can route the DM1000’s internal signals to 2TR OUT DIGITAL connectors 1–2.
1 Press the DISPLAY ACCESS [OUTPUT PATCH] button repeatedly until the Out
Patch | 2TR Out page appears.
Signals assigned on the Omni Out page can also be assigned to the 2TR digital outputs.
2 Move the cursor to a patch parameter you wish to change, and rotate the
Parameter wheel or press the [INC]/[DEC] buttons to modify the patching.
3 Press [ENTER] to confirm the change.
Patching Slot Outputs
You can route the DM1000’s internal signals to optional mini-YGDAI cards installed in Slot
1 and 2.
1 and 2.
1 Press the DISPLAY ACCESS [OUTPUT PATCH] button repeatedly until the Out
Patch | Slot Out page appears.
Signals assigned on the Omni Out page can also be assigned to the slot outputs. However,
you cannot assign SURR. XXX and M.MX XXX.
you cannot assign SURR. XXX and M.MX XXX.
2 Move the cursor to a patch parameter you wish to change, and rotate the
Parameter wheel or press the [INC]/[DEC] buttons to modify the patching.
3 Press [ENTER] to confirm the change.