Yamaha 006IPTO-F0 Manual Do Utilizador
Fading Scenes
169
DM1000 Version 2—Owner’s Manual
Scene Memories
14
Fading Output Channels
To set the Fade Time for the Output Channels (Stereo Out, Bus Outs 1–8, Aux Outs 1–8),
press the DISPLAY ACCESS [SCENE] button repeatedly until the Scene | Out Fade page
appears.
press the DISPLAY ACCESS [SCENE] button repeatedly until the Scene | Out Fade page
appears.
The basic operation is the same as on the In Fade page.
A
BUS1–8
These parameters enable you to set the Fade Time for each Bus Out (1–8) in the range
of 00.0 through 30.0 seconds.
These parameters enable you to set the Fade Time for each Bus Out (1–8) in the range
of 00.0 through 30.0 seconds.
B
AUX1–8
These parameters enable you to set the Fade Time for Aux Outs 1–8.
These parameters enable you to set the Fade Time for Aux Outs 1–8.
C
STEREO
This parameter enables you to set the Fade Time for the Stereo Out.
This parameter enables you to set the Fade Time for the Stereo Out.
D
INPUT MASTER A–H
These parameters enable you to set the Fade Time for Input Fader Group Master A–H.
These parameters enable you to set the Fade Time for Input Fader Group Master A–H.
E
OUTPUT MASTER Q–T
These parameters enable you to set the Fade Time for Output Fader Group Master Q–T.
These parameters enable you to set the Fade Time for Output Fader Group Master Q–T.
Tip: You can copy the currently-selected Output Channel Fade Time setting to all Output
Channels by double-clicking the [ENTER] button.
Channels by double-clicking the [ENTER] button.
3
2
5
4
1