Yamaha 006IPTO-F0 Manual Do Utilizador
332
Appendix B: Specifications
DM1000 Version 2—Owner’s Manual
Appendix B: Specifications
General Spec
Number of scene memories
99
Sampling Frequency
Internal
44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz
External
Normal rate: 44.1 kHz–10% to 48 kHz+6%
Double rate: 88.2 kHz–10% to 96 kHz+6%
Signal Delay
fs=48 kHz
Less than 1.6 ms CH INPUT to OMNI OUT
fs=96 kHz
Less than 0.8 ms CH INPUT to OMNI OUT
Fader
100 mm motorized with touch sense
× 17
Fader Resolution
+10 to –138, –
∞ dB input faders
0 to –138, –
∞ dB master faders, stereo fader
Total Harmonic Distortion
1
(CH INPUT to OMNI OUT)
(Input Gain=Min.)
(Input Gain=Min.)
fs=48 kHz
Less than 0.05% 20 Hz to 20 kHz @ +14 dB into 600
Ω
Less than 0.01% 1 kHz @ +24 dB into 600
Ω
fs=96 kHz
Less than 0.05% 20 Hz to 40 kHz @ +14 dB into 600
Ω
Less than 0.01% 1 kHz @ +24 dB into 600
Ω
Frequency Response
(CH INPUT to OMNI OUT)
(CH INPUT to OMNI OUT)
fs=48 kHz
20 Hz–20 kHz, 0.5, –1.5 dB @ +4 dB into 600
Ω
fs=96 kHz
20 Hz–40 kHz, 0.5, –1.5 dB @ +4 dB into 600
Ω
Dynamic Range
(maximum level to noise level)
(maximum level to noise level)
110 dB typ. DA Converter (OMNI OUT)
106 dB typ. AD+DA (to OMNI OUT) @ fs=48 kHz
106 dB typ. AD+DA (to OMNI OUT) @ fs=96 kHz
Hum & Noise
2
(20 Hz–20 kHz)
Rs=150
Rs=150
Ω
–128 dB Equivalent Input Noise
–86 dB residual output noise. OMNI OUT (STEREO OUT off)
Input Gain=Max.
Input Pad =0 dB
Input Pad =0 dB
–86 dB (90 dB S/N) OMNI OUT
(STEREO fader at nominal level and all CH INPUT faders at minimum level)
(STEREO fader at nominal level and all CH INPUT faders at minimum level)
Input Pad =0 dB
Input Sensitivity
=–60 dB
Input Sensitivity
=–60 dB
–64 dB (68 dB S/N) OMNI OUT
(STEREO fader at nominal level and one CH INPUT fader at nominal level)
(STEREO fader at nominal level and one CH INPUT fader at nominal level)
Maximum Voltage Gain
74 dB CH INPUT (CH1–16) to OMNI OUT (STEREO, BUS, AUX)
Crosstalk
(@ 1 kHz)
(@ 1 kHz)
Input Gain=Min.
80 dB adjacent input channels (CH1–16)
80 dB input to output
AD Input (1–16)
Phantom switch
+48 V DC
Pad switch
0/20 dB attenuation
Gain control
44 dB (–60 to –16), detented
Peak indicator
LED (red) turns on when post HA level reaches 3 dB below clipping at dig-
ital domain
ital domain
Signal indicator
LED (green) turns on when post HA level reaches 20 dB below nominal at
digital domain
digital domain
AD converter
24-bit linear, 128-times oversampling (fs=44.1, 48 kHz), 64-times over-
sampling (fs=88.2, 96 kHz)
sampling (fs=88.2, 96 kHz)
Analog Input
(OMNI IN 1–4)
(OMNI IN 1–4)
AD converter
24-bit linear, 128-times oversampling (fs=44.1, 48 kHz), 64-times over-
sampling (fs=88.2, 96 kHz)
sampling (fs=88.2, 96 kHz)
Option Input (SLOT 1–2)
Available cards
Optional digital interface cards (MY16, MY8, MY4 series)
Digital Input
(2TR IN DIGITAL 1–2)
(2TR IN DIGITAL 1–2)
SRC
On/off (1:3 and 3:1 maximum input to output sample rate ratio)