Yamaha 006IPTO-F0 Manual Do Utilizador

(5)-1

  1/2

* Please keep this manual in a safe place for future reference.

• Only use the voltage specified as correct for the device. The required voltage is 

printed on the name plate of the device.

• Use only the specified power code.

• Do not place the power cord near heat sources such as heaters or radiators, and 

do not excessively bend or otherwise damage the cord, place heavy objects on 
it, or place it in a position where anyone could walk on, trip over, or roll anything 
over it.

• Be sure to connect to an appropriate outlet with a protective grounding 

connection. Improper grounding can result in electrical shock.

• Do not open the device or attempt to disassemble the internal parts or modify 

them in any way. The device contains no user-serviceable parts. If it should 
appear to be malfunctioning, discontinue use immediately and have it inspected 
by qualified Yamaha service personnel.

• Do not expose the device to rain, use it near water or in damp or wet conditions, 

or place containers on it containing liquids which might spill into any openings.

• Never insert or remove an electric plug with wet hands.

• If the power cord or plug becomes frayed or damaged, or if there is a sudden 

loss of sound during use of the device, or if any unusual smells or smoke 
should appear to be caused by it, immediately turn off the power switch, 
disconnect the electric plug from the outlet, and have the device inspected by 
qualified Yamaha service personnel.

• If this device should be dropped or damaged,  immediately turn off the power 

switch, disconnect the electric plug from the outlet, and have the device 
inspected by qualified Yamaha service personnel.

• Remove the electric plug from the outlet when the device is not to be used for 

extended periods of time, or during electrical storms.

• When removing the electric plug from the device or an outlet, always hold the 

plug itself and not the cord. Pulling by the cord can damage it.

• When transporting or moving the device, always use two or more people.

• Before moving the device, remove all connected cables. When you move the 

device with the MB1000 attached, do not permit impact or stress on the cable 
connector that connects the MB1000 to the device.

• When setting up the product, make sure that the AC outlet you are using is 

easily accessible. If some trouble or malfunction occurs, immediately turn off 
the power switch and disconnect the plug from the outlet. Even when the power 
switch is turned off, electricity is still flowing to the product at the minimum 
level. When you are not using the product for a long time, make sure to unplug 
the power cord from the wall AC outlet.

• Avoid setting all equalizer controls and faders to their maximum. Depending on 

the condition of the connected devices, doing so may cause feedback and may 
damage the speakers.

• Do not expose the device to excessive dust or vibrations, or extreme cold or heat 

(such as in direct sunlight, near a heater, or in a car during the day) to prevent 
the possibility of panel disfiguration or damage to the internal components.

• Do not place the device in an unstable position where it might accidentally fall 

over.

• Do not block the vents. This device has ventilation holes at the top/front/rear/

sides to prevent the internal temperature from rising too high. In particular, do 
not place the device on its side or upside down, or place it in any poorly-
ventilated location, such as a bookcase or closet.

• Do not use the device in the vicinity of a TV, radio, stereo equipment, mobile 

phone, or other electric devices. Otherwise, the device, TV, or radio may 
generate noise.

• If you are using the optional MB1000 Peak Meter Bridge, do not hold only the 

MB1000 when moving this unit. Otherwise, the meter brackets may be 
damaged, the main unit may malfunction, or you may be injured if the unit falls.

• Before connecting the device to other devices, turn off the power for all devices. 

Before turning the power on or off for all devices, set all volume levels to 
minimum.

• Be sure to connect to a properly grounded power source. A ground screw 

terminal is provided on the rear panel for safely grounding the device and 
preventing electrical shock.