Yamaha 006IPTO-F0 Manual Do Utilizador
58
Chapter 5—Analog I/O & Digital I/O
DM1000 Version 2—Owner’s Manual
E
CATEGORY
Indicates the status of “Category Code Bit” included in the IEC958 Part 2 (S/PDIF-Con-
sumer) format. This parameter can display the following values:
Indicates the status of “Category Code Bit” included in the IEC958 Part 2 (S/PDIF-Con-
sumer) format. This parameter can display the following values:
F
COPY
Indicates the status of copy protection information included in the IEC958 Part2
(S/PDIF-Consumer) format signals. “OK” appears if copying is allowed. “Prohibit”
appears if copy-protected.
Indicates the status of copy protection information included in the IEC958 Part2
(S/PDIF-Consumer) format signals. “OK” appears if copying is allowed. “Prohibit”
appears if copy-protected.
3 If you select the SLOT button for a slot that has an
MY16-AE card installed, use the 01–08 and 09–16 but-
tons located in the lower-right corner of the screen
to select a channel group you wish to display.
tons located in the lower-right corner of the screen
to select a channel group you wish to display.
Parameter values
Description
General
Temporarily used.
Laser Optical
Laser optical device
D/D Conv
Digital - Digital converter and signal processing device
Magnetic
Magnetic tape device and magnetic disk device
D.Broadcast
Digital broadcast reception
Instruments
Musical instrument, microphone, and sources that generate string
signals
signals
A/D Conv
A/D converter (without copyright information)
A/D Conv with(C)
A/D converter (with copyright information)
Solid Memory
Solid memory device
Experimental
Experimental device
Unknown
Unknown
Note: “AES/EBU” appears in the Category row when you are monitoring IEC958 Part 3
(AES/EBU-Professional) format signals (that do not include Category Code Bit).
(AES/EBU-Professional) format signals (that do not include Category Code Bit).