Thermador PODMW301 Manual Do Utilizador

English 6

Inserting Racks

The rack is designed with a stop so it will stop before 
coming completely out of the oven and not tilt. 

1. Grasp rack firmly on both sides and pull rack toward 

you.

2. When the stop is reached, tilt rack up and pull the rest 

of the way out.

The telescopic rack cannot be installed in the lowest rack 
position 0.

To avoid burns, place oven racks in desired 
positions before turning oven on. Always use 
oven mitts when the oven is warm. If a rack 
must be moved while the oven is hot, do not 
let oven mitts contact hot heating elements.

Use caution when removing oven racks from 
the lowest rack position to avoid contact with 
the hot oven door.

To avoid possible injury or damage to the 
appliance, ensure racks are installed exactly 
per installation instructions and not 
backwards or upside down.

1. Grasp rack firmly on 

both sides.

2. Insert rack (see 

picture).

3. Tilt rack up to allow 

stop into rack guide.

4. Bring rack to a 

horizontal position and 
push the rest of the 
way in. Rack should 
be straight and flat, 
not crooked.

1. Hold the rack on a 

slight angle.

2. Engage the rear hooks 

in the accessory 
brackets.

3. Hold the rack straight.
4. Push the rack in until it 

is even with the front 
hooks.

5. Lift the rack up.
6. Push the rack in 

completely.

7. Engage the rack’s 

front hooks in the 
accessory brackets.
This is very important 
to ensure that the rack 
is installed correctly 
(see the enlarged 
picture).