Thermador MEM301 Manual Do Utilizador

9

It is good practice, when oven is in-
stalled at the end of a cabinet run, ad-
jacent to a perpendicular wall or 
cabinet door, to allow at least 1/4” 
space between the side of the oven 
and the wall/door.

For oven support, install 2x4’s extend-
ing front to back flush with the bottom 
and the side of the opening. The sup-
porting base must be well secured to 
the floor/cabinet and level.

Note: The conduit box must be in-
stalled either above or below the unit. If 
the conduit box is installed below the 
unit, a 2” diameter hole or space is re-
quired between the back wall and the 
right rear of the 2x4 supports.