Hoshizaki KM-1400SWH/3-M Manual Do Utilizador

22

This icemaker must be maintained individually, referring to the instruction manual and 
labels provided with the icemaker.

1. Only qualified service technicians should attempt to service this icemaker.
2. Disconnect power before servicing.

To prevent corrosion, wipe the exterior occasionally with a clean, soft cloth. Use a damp 
cloth containing a neutral cleaner to wipe off oil or dirt buildup.

• Wash your hands before removing ice. Use the plastic scoop provided (bin accessory).
• The storage bin is for ice use only. Do not store anything else in the storage bin.
• Clean the scoop and the storage bin liner using a neutral cleaner. Rinse thoroughly 

after cleaning.

1. When storing the icemaker for an extended time or in sub-freezing 

temperatures, follow the instructions below to prevent damage.

2. To prevent damage to the water pump seal, do not operate the icemaker with 

the control switch in the "WASH" position when the water tank is empty.

When the icemaker is not used for two or three days under normal conditions, it is sufficient 
to move the control switch to the "OFF" position. When storing the icemaker for an extended 
time or in sub-freezing temperatures, follow the instructions below.
1. Remove the water from the icemaker water supply line:

1) Turn off the power supply, then remove the front panel.
2) Move the control switch on the control box to the "OFF" position.
3) Close the icemaker water supply line shut-off valve, then open the icemaker water 

supply line drain valve.

4) Allow the line to drain by gravity.
5) Attach a compressed air or carbon dioxide supply to the icemaker water supply line 

drain valve.

6) Move the control switch to the "ICE" position.
7) Replace the front panel in its correct position, then turn on the power supply.
8) Blow the icemaker water supply line out using the compressed air or carbon dioxide 

supply.

9) Close the icemaker water supply line drain valve.