Ricoh 8070 Manual Do Utilizador
Interface Settings
49
2
Interface Settings
This section describes the user tools in the Interface Settings menu under System
Settings.
Settings.
Network
This section describes the user tools in the Network menu under Interface Set-
tings.
Default settings are shown in bold type.
tings.
Default settings are shown in bold type.
❖ Machine IPv4 Address
Before using this machine in the network environment, you must configure
the IP address and subnet mask.
When you select [Specify], enter the [Machine IPv4 Address] and [Sub-net Mask]
as “xxx.xxx.xxx.xxx” (“x” indicates a number).
When you select [Specify], be sure not to set the same [Machine IPv4 Address] as
that of another machines on the network.
The physical address (MAC Address) also appears.
the IP address and subnet mask.
When you select [Specify], enter the [Machine IPv4 Address] and [Sub-net Mask]
as “xxx.xxx.xxx.xxx” (“x” indicates a number).
When you select [Specify], be sure not to set the same [Machine IPv4 Address] as
that of another machines on the network.
The physical address (MAC Address) also appears.
❖ IPv4 Gateway Address
A gateway is a connection or interchange point between two networks.
Configure the gateway address for the router or host computer used as a gate-
way.
The default setting is 000.000.000.000
Configure the gateway address for the router or host computer used as a gate-
way.
The default setting is 000.000.000.000
❖ Machine IPv6 Address
You can specify the machine’s IPv6 network address.
• Link-local Address
• Link-local Address
The machine’s specified link-local address appears.
• Manual Configuration Address
The machine’s manually configuration address appears.
• Stateless Address: 1-5
The specified stateless address appears.
❖ IPv6 Gateway Address
The machine’s IPv6 gateway address appears.
❖ IPv6 Stateless Address Autoconfiguration
You can set “IPv6 Stateless Address Autoconfiguration” to “Active” or “Inac-
tive”.
The default setting is Active.
tive”.
The default setting is Active.