Manitowoc Ice K00022 Folheto

1.          The K00022 adapter kit is used for installing a B-0450, B-0600, B-0800, or B-1000 ice machine on a C-950 bin.         
                The bin must be leveled before proceeding to step 2. 
 
2.     Installation of adapter (see illustration): 
        A.     Remove foam tape from around bin. 
                B.          Remove existing ice deflector and install deflectors from kit using existing screws.    The two deflectors 
 

    should be installed end-to-end to make one continuous deflector. 

                C.          Apply foam tape to adapters and front and rear bin rail, as shown. 
        D.     Locate right-hand and left-hand adapter panels. 
                E.          Using the adapter panels as templates, drill four 5/32” diameter holes for each adapter in bin. 
        F.     Fasten panels in place with the screws provided in kit. 
 
3.     Installation of ice machine: 
                A.          Position ice machine on bin. 
        B.     Proceed to ice machine installation instructions for electrical and water hook-up and start-up procedure. 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

 
 
 
 

2110 South 26 Street, P.O. Box 1720, Manitowoc, WI  54221-1720 USA                                                                                                             
8001453      
Telephone 920-682-0161, Fax - Sales:    920-683-7589, Service/Parts: 920-683-7585,    Other:  920-683-7879                                              
Web Site - 

www.manitowocice.com

                                                                                                                                                                                                                                                       

Rev. 04/29/99