Yamaha DM2000 Manual Do Utilizador
Pre-Fader or Post-Fader Aux Sends
111
DM2000 Version 2—Owner’s Manual
Pre-Fader or Post-Fader Aux Sends
Aux Sends can be configured individually as either pre-fader or post-fader on the Aux Send
pages (see page 112) or the Aux View pages (see page 115). If Aux Sends are configured as
pre-fader, you can position the send points before or after the [ON] buttons.
pages (see page 112) or the Aux View pages (see page 115). If Aux Sends are configured as
pre-fader, you can position the send points before or after the [ON] buttons.
Setting Aux Send Levels
Aux Send levels can be set by using the SELECTED CHANNEL AUX/MATRIX SEND
LEVEL controls, the faders, or the Encoders.
LEVEL controls, the faders, or the Encoders.
Using the SELECTED CHANNEL AUX/MATRIX SEND LEVEL Controls
1
Use the LAYER buttons to select the Input Channel Layers, and use the [SEL]
buttons to select Input Channels.
buttons to select Input Channels.
2
Use the [BANK] button to select Aux 1–4, Aux 5–8, or Aux 9–12.
3
Use the LEVEL controls to set the Aux Send levels.
Using the Faders
1
Use the LAYER buttons to select the Input Channel Layers.
2
Press the FADER MODE [AUX/MTRX] button to select the Aux/Mtrx
Fader mode.
Fader mode.
3
Use the AUX SELECT [AUX 1]–[AUX 12] buttons to select Aux Sends
1–12.
1–12.
4
Use the faders to set the Aux Send levels.
Refer to the legend on the left side of the faders when setting Aux Send levels.
Using the Encoders
1
Use the LAYER buttons to select the Input Channel Layers.
2
Press the ENCODER MODE [AUX/MTRX] button to select the Aux/Mtrx
Encoder mode.
Encoder mode.
3
Use the AUX SELECT [AUX 1]–[AUX 12] buttons to select Aux Sends 1–12.
4
Use the Encoders to set the Aux Send levels.
AUX / MATRIX SEND
LEVEL
ON
LEVEL
ON
LEVEL
ON
LEVEL
ON
AUX
1
/ MATRIX
1
AUX
5
AUX
9
AUX
2
/ MATRIX
2
AUX
6
AUX
10
AUX
3
/ MATRIX
3
AUX
7
AUX
11
AUX
4
/ MATRIX
4
AUX
8
AUX
12
BANK
DISPLAY
50
40
30
20
15
10
10
5
0
5
70
60
50
40
30
20
15
10
5
0