Yamaha DM2000 Manual Do Utilizador
Resetting Faders, Sends, Panpots & Plug-ins
247
DM2000 Version 2—Owner’s Manual
Resetting Faders, Sends, Panpots & Plug-ins
Faders, panpots, sends, and plug-ins can be reset to their default values as follows. For faders
and send controls, this is “0.” For panpots, it’s center.
and send controls, this is “0.” For panpots, it’s center.
Make sure that the ENCODER MODE [ASSIGN 4] (INSERT) button indicator is off before
proceeding with these shortcuts.
proceeding with these shortcuts.
While the [MATRIX 1] (DEFAULT) button is being pressed, its indicator flashes and
“DFLT” appears in the SELECT ASSIGN section of the display.
“DFLT” appears in the SELECT ASSIGN section of the display.
Grouped channels are reset together. You can temporarily disable a group by pressing and
holding the USER DEFINED KEYS [12] (CTRL/CLUTCH) button before pressing the
[MATRIX 1] (DEFAULT) button.
holding the USER DEFINED KEYS [12] (CTRL/CLUTCH) button before pressing the
[MATRIX 1] (DEFAULT) button.
Navigating the Edit Window
The cursor buttons can be used to navigate the Edit window as follows.
1
Use the [INC] (CURSOR MODE) button to select Navigation cursor mode.
The CURSOR MODE section of the display shows “NAVIGATION.”
2
To move the edit cursor to the previous region boundary, or to the previous
marker, press the Left cursor button.
marker, press the Left cursor button.
3
To move the edit cursor to the next region boundary, or to the next marker,
press the Right cursor button.
press the Right cursor button.
4
To select the track above, press the Up cursor button.
5
To select the track below, press the Down cursor button.
The following shortcuts apply.
To do this...
Do this!
Reset a channel fader
[MATRIX 1] + [SEL]
Reset all channel faders
USER DEFINED KEYS [5] + [MATRIX 1] + [SEL]
Reset all selected channel faders
USER DEFINED KEYS [5] + USER DEFINED KEYS [4] + [MATRIX 1]
+ [SEL]
+ [SEL]
Reset a channel panpot
[PAN], [MATRIX 1] + [ENCODER push]
Reset all channel panpots
[PAN], USER DEFINED KEYS [5] + [MATRIX 1] + [ENCODER push]
Reset all selected channel panpots
[PAN], USER DEFINED KEYS [5] + USER DEFINED KEYS [4] +
[MATRIX 1] + [ENCODER push]
[MATRIX 1] + [ENCODER push]
Reset a channel send level
AUX SELECT [AUX 1]–[AUX 5], [MATRIX 1] + [ENCODER push]
Reset all channel send levels
AUX SELECT [AUX 1]–[AUX 5], USER DEFINED KEYS [5] +
[MATRIX 1] + [ENCODER push]
[MATRIX 1] + [ENCODER push]
Reset all selected channel send levels
AUX SELECT [AUX 1]–[AUX 5], USER DEFINED KEYS [5] + USER
DEFINED KEYS [4] + [MATRIX 1] + [ENCODER push]
DEFINED KEYS [4] + [MATRIX 1] + [ENCODER push]
Reset the currently selected plug-in
[MATRIX 1] + EFFECTS PLUG-INS [6]
To do this...
Do this!
Extend the selection
USER DEFINED KEYS [4] + Left or Right cursor button
Select the previous region
USER DEFINED KEYS [12] + Left cursor button
Select the next region
USER DEFINED KEYS [12] + Right cursor button
Display the in point of the selected region
in the center of the Edit window
in the center of the Edit window
USER DEFINED KEYS [5] + Left cursor button (or LOCATE
MEMORY [IN] button)
MEMORY [IN] button)
Display the out point of the selected
region in the center of the Edit window
region in the center of the Edit window
USER DEFINED KEYS [5] + Right cursor button (or LOCATE
MEMORY [OUT] button)
MEMORY [OUT] button)